Heat Resistant Transfer Industrial Felt

Heat Resistant Transfer Industrial Felt

Description:

We are offering Heat Transfer Printing Felt. They are used on roller transfer machine when textile printing.

Our Nomex Transfer Felt use imported DuPont Aramid 1313, the middle fabric for high-performance industrial silk fabric. It can work under 300°C. After the use, the shrinkage of width is 3% max, the elongation is 3%, the weight is 3300g/m2, the thickness could be 8mm, and can also be customized thicker type according to customer's demand. The thickness could be 3600g/m2. Which is a special blanket for transfer printing of various fabrics, curtain fabrics, and decorative fabrics. Specifications can be customized according to customer needs.

Our Transfer Printing Belt Specification

Product name	Heat Resistant Endless Printing Felt
Material	100% Nomex/ Mixed material
Perimeter	500-5000mm
Width	600-4000mm
Thickness	4-12mm
Temperature	200℃-300℃
We can customized products according your specification

Heat Resistant Felt Belt Nomex Felt Advantage

1. Specially added seamless base fabric, the base fabric is endless industrial silk. Testing report showed the misaligned rate is about ±3mm. - will avoid misaligned problem.

2. The base fabric can control the shrinkage rate in 2.5%--3%. - will avoid the belt not suitable for the machine.

3. 100% DUPONT Nomex - improve working life and end product quality.

Appliacation:

Our Transfer Printing Blanket can use in those brand: Klieverik, Monti, Transmatic, Lemaire, Practix, Sorim, Studio FX, Stork, Bates, Wuppertal, Kristall, Sublistatic, Gessner, Bizmak, S.T.M., Singer, KMT, MOGK, TURAL MAKINA...

Heat Resistant Felt Belt Nomex Felt Detail Image

Heat Resistant Felt Belt Nomex Felt Packing details

Waterproof film + bubble film + woven bag + kraft paper(or as your demands)

FAQ:

When you use our pasting belt during your production,you could refer to the following solution if you have following problems:
1.The belt was scratched when the machine was running.-- please check if there is any debris in the belt or in the lead paste. (please make sure that there is no debris on the tape.)
2.The belt slippage when the machine was running,

-- please make sure that the tape is fully wet with warm water before the machine and properly adjust the elastic shaft.

3.When the machine is running, the tape is stuck.-- kindly make sure the belt thickness is suitable for your machine, and proper adjustment of the scraper height can alleviate the problem.
4.The belt is too hard to get on machine.

--- steam it for about 5 minutes.Once you have other problem, kindly contact us to give you the solutions.

Contact us if you need more details on Nomex 240 Degree Printing Felt. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Industrial Printing Polyester Textile Belt、Textile Printing Felt. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Transfer Printing Felt